Contents hide


So how to mineral wash a shirt? In the 1980s, mineral washing was known as “acid washing,” and it was most widely used on denim jeans to give them a colorful look that stood out from regular denim. However, mineral washing isn’t just for jeans. Mineral washing is possible on shirts, stockings, and other materials.

Mineral washing is a technique for giving your clothes an old, aged look. During the punk era, this style was very popular. It’s a bleach-dyeing variety.

Compared to regular jeans, the washed-out, bleached denim stood out. It’s still very much a part of young culture, and it’s being loved with various types of tie-dye today.

The method only involves a few basic supplies, and the final result is a unique outfit that reflects your personality.

How to mineral wash a shirt? AT A GLANCE: MINERAL WASH

Image credit:

 1st Step

 In a thick plastic jar, pour bleach over numerous pumice stones. Because bleach is caustic and emits strong odors, use rubber gloves and ventilate the area. The stones should be in the bleach solution for at least six hours.

2nd Step

 Spray the garment with a solution of 2 parts bleach to 1 part water in a spray bottle. To keep the bleach from hurting the rest of the room, put the clothes in a big sink or bathtub.

3rd Step 

To dye the fabric, vigorously rub the bleach-soaked pumice stones over it. Once the stone rubbing is finished, let the garment sit for 10 minutes before rinsing it with water to remove the bleach. The longer bleach is in contact with the fabric, the more it fades and corrodes it.

4th Step

 Wash the garments at a cool temperature in a washing machine by themselves. To eliminate any residual bleach, use washing detergent. Dry the clothing on a clothesline or in the dryer.

How to mineral wash a shirt? Mineral wash descriptive guidance

Take a 100% cotton shirt, some bleach, and a sponge. Bleach should be sprayed or poured onto a sponge or foam block. The sponge should be rubbed on the fabric. Allow time for the bleach to fade the dye. When working with bleach, always be sure to use gloves at all times.

  1. Get all of your materials.
  2. Make a 1:1 solution of bleach and water.
  3. Spray or pour the bleach solution onto a sponge.
  4. Use the sponge to scrub the garment.
  5. Scrub and work the garment till you’re happy.
  6. Turn the shirt inside out and scrub the backside.
  7. Wait 10 minutes, or until the color has faded to your satisfaction.
  8. Rinse off the bleach.
  9. To neutralize the bleach, soak the clothing in hydrogen peroxide.
  10. Wash and tumble dry the clothing after rinsing it.


Image credit:

 Let’s take a closer look at the mineral wash procedure. You’ll have a tailored wardrobe in no time if you follow these guidelines.

  1. Get all of your materials.

There are simply a few things you’ll need. The following is a summary of the short list:

  • Dark-colored cotton shirt
  • Sponge
  • Bleach
  • Gloves
  • Plastic tub
  • Hydrogen peroxide (H2O2)
  1. Make a 1:1 solution of bleach and water.

 Mix 1 cup bleach + 1 cup water. We’ll dilute the bleach to make it less potent. This will allow us to devote more attention to the shirt.

  1. Using a sponge, spray the bleach solution.

Apply bleach to the sponge. Soak the sponge in the bleach solution by pouring or spraying it. The sponge should be able to absorb some of the discharge agent.

The more bleach is in the sponge, the more the shirt’s color will fade. By adjusting the amount of bleach on your sponge, you can control the amount of discoloration.

  1. Use the sponge to scrub shirt.

Rub the garment with your bleach-soaked sponge. With the sponge, smear the shirt in a haphazard pattern. Work on the shirt some more. The hue will begin to shift shortly.

  1. Scrub once more until the color starts to change.

Scrub and poke at the garment with the bleach-soaked sponge until you’re satisfied with the results.

If required, add extra bleach. From time to time, you may need to pause and replace the bleach on the sponge.

  1. Turn the shirt inside out and scrub the backside.

You’ll want to flip the shirt over once the front side has faded to your preference. On the reverse of the shirt, we’ll do the same thing.

Reverse the procedure you used on the front. Make sure your sponge has enough bleach on it. Scrub the back of your neck and quit when you’re satisfied.

  1. Let the color change for 10 minutes.

For a few minutes, keep an eye on the shirt to see how it changes color. This process can be halted at any time. Wait till it reaches the desired color.

  1. Rinse off the bleach.

To remove the majority of the bleach, rinse the shirt under running water. Rinse the shirt under the faucet for 2-3 minutes. Expose every portion of the clothing to the water by opening it up.

  1. Use hydrogen peroxide to neutralize the bleach.

Using hydrogen peroxide, soak the garment. This will protect the fabric from the bleach’s harmful effects.

This step is not required, but it is highly encouraged. If the bleach is not neutralized, it will eat away at the fabric and cause holes over time.

  1. Clean the shirt by rinsing, washing, and then dry it.

Remove the hydrogen peroxide from the previous step by rinsing the clothing. Wash the shirt for a full cycle on cold in the washing machine. Use your preferred detergent. Tumble dry or line dry.


Yes, a shirt with a graphic can be mineral washed. Feel free to wear a shirt with a band or TV show graphic on it.

Bleach will react with the graphics as part of the process. Some types of graphics will crack and peel, which will make the old impression even stronger.


No, any color shirt can be washed in mineral water. The most common hues used are black, gray, and dark blue, but any color will do.

IS IT POSSIBLE TO MINERAL WASH A TIE-DYE SHIRT? How to mineral wash a shirt?

 Yes, a tie-dye shirt can be mineral washed. It’s as simple as following the steps one by one. A shirt that has been mineral washed can also be tie-dyed.

How to mineral wash a shirt? HOW TO ACID WASH

Image credit:

 The process of acid washing, also known as stone washing, is quite similar to the process of mineral washing. It’s an older technique, yet it works just as well now. When working with bleach, always be sure to use gloves at all times.


If you’re looking for a one-of-a-kind item, shirts, hoodies, trousers, denim vests, canvas shoes, and other items can be mineral washed or acid washed. Use an old item of clothing if you want to impart a worn-in effect.

  1. Shirt made of cotton
  2. Bleach
  3. Pumice Stone
  4. Gloves
  5. Hydrogen peroxide (H2O2)
  6. Plastic tub

Pumice stones are porous, abrasive stones formed when lava collides with water. They have pores that can absorb bleach and are abrasive enough to deteriorate clothes.


Image credit:

 To achieve a worn effect, acid washing is done using bleach and pumice stones. While the bleach degrades the color, the pumice stone will scrape against the cloth, weakening and degrading it.

  1. Make a bleach and water solution in a 1:1 ratio.
  2. Soak the pumice stones for 6 hours in the solution.
  3. Scrub the clothing with a bleach-soaked pumice stone.
  4. Scrub and work the garment till you’re happy.
  5. Flip the garment over and use the pumice stone to scrub the back.
  6. Allow 10 minutes, or until the color has faded to your liking.
  7. Rinse the bleach out of your hair.
  8. To neutralize the bleach, soak the clothing in hydrogen peroxide.
  9. After rinsing the clothing, wash and tumble dry it.


 Always try with 100% cotton clothing. Begin with inexpensive cotton shirts to understand the method. When you have the opportunity, switch to more unusual things.

Nothing compares to a pair of vintage jeans or a denim jacket. Cotton, linen, and hemp can be mineral washed and acid washed.


 Mineral or acid washing of polyester fabric is not suggested. All synthetics are bleach-resistant and readily destroyed.

FAQs: How to mineral wash a shirt?

What is mineral wash clothing?

Mineral wash clothing is a fashion treatment process that creates a vintage, worn-in, and slightly distressed look on garments. This technique involves using pumice stones or other abrasives, along with a mineral dyeing process, to give the fabric a faded appearance, resulting in unique and fashionable clothing items.

How do you make a shirt look stonewashed?

To make a shirt look stonewashed, you can follow these steps: Start by washing the shirt with pumice stones or abrasive materials, such as rocks or abrasive chemicals, in a washing machine. This process creates a distressed and faded appearance on the fabric, giving the shirt the stonewashed look.

What is a mineral shirt?

There is no specific term “mineral shirt” in the context of clothing or fashion. It’s possible that you may be referring to “mineral wash” or “mineral washed” shirts, which are garments treated using a special process to create a vintage and worn-in appearance.

How do you acid wash a shirt at home?

To acid wash a shirt at home, you can follow these steps: First, fill a container with a mixture of equal parts water and bleach, then submerge the shirt, leaving it to soak for a desired amount of time to achieve the level of fading you want. After that, rinse the shirt thoroughly with cold water and launder it separately from other clothing to ensure the bleach does not affect other garments in the wash.

Conclusion: How to mineral wash a shirt?

How to mineral wash a shirt? In conclusion, mineral washing a shirt is a creative and accessible method to achieve that sought-after vintage and distressed look. By following the steps and techniques outlined in this guide, you can transform ordinary garments into stylish fashion statements. Embrace the world of mineral washing and enjoy the unique and trendy results, making your shirts stand out with their one-of-a-kind charm.

Watch: How to Mineral Wash Clothes

Read More:

Can You Wash Multiple Tie Dye Shirts Together?

How Much Does a Shirt Weigh?

Can you tie dye a black shirt?

Can you tie dye a grey shirt?