Tie-dyeing is a type of hand-dyeing technique that requires putting together several small pieces of fabric and tying them together with string before immersing the material in the dye-bath. A hand technique for producing patterns in textiles involves tying pieces of the cloth or yarn so that they do not absorb the dye. Tie dyeing can be done on knit or woven fabric, usually cotton, and brilliant colours are popular. The traditional dying method involves folding the material into a pattern and binding it with string or rubber bands. Tie dyes can be made with ordinary packet dyes, fiber reactive dyes, acid, and vat dyes.

So, is it actually possible to tie dye a black shirt?

It is technically possible, but the dying process takes time and focus. Because black is the deepest of all hues, no color added on top of it will make a substantial difference. Because dye is translucent, it just adds to the colour of the clothing underlying, rather than covering it. A white background is required for the brightest and best colours.

Beginning with just about any light colour will also yield wonderful results. The fabric, on the other hand, may not bleach out as expected. Not all black dyes are affected by bleach or colour remover, and some will be only affected by one. Hypochlorite would destroy all synthetic fibres, like as polyester or spandex, and that you should never use bleach to dispense any shirt that isn’t 100 percent cotton.

Steps to tie dye a black shirt

Steps to tie dye a black shirt

The following guide shows the steps to tie dye a black shirt using ‘reverse die procedure’ technique.

  1. Soak the material in water to make it wet.
  2. Wring the material to prevent the water dripping.
  3. The third step depends on the pattern you’d like. For example, if you want a rainbow swirl pattern, you can swirl the material and use rubber bands to hold the shape.
  4. Get a pair of gloves and bleach for the tie dye mixture.
  5. Dilute 1 portion of bleach with 1 portion of water and store the mixture in a spray bottle.
  6. Then, spray the bleach mixture, based on the desired pattern.
  7. You can then observe the bleached sections will change to a red shade colour. You can let the bleach soak in for 15 to 20 minutes, the section will turn into yellow shade.
  8. Once you get your desired colour, rinse the material after removing the bands. After washed, dry the material and it’s done.

Conclusion

This article explained the usages of tie dye. This also mentioned the question, if you could tie dye a black shirt, where the possibilities, advantages and disadvantages were discussed. Moreover, a common method to tie dye black shirts was also explained step-by-step.

Stay tuned with our site to explore more interesting articles. Do not forget to read our previous articles.

Can you tie dye a grey shirt? (Grey clothes)

How do I make pink for tie dye?